请注意:本网站仅提供英文版本。

BOPP and BOPE Inline Coating: Perfect barrier, improved recyclability

15 Dec 2020

Brückner’s solutions for new and used equipment

Driven by the discussions about recycling targets for plastic packaging, mono-material packaging structures are receiving more and more interest: for example, biaxially oriented polypropylene (BOPP) or polyethylene (BOPE) films. Reasons for this are a better sortability of the packaging and an improved quality of recycling materials. With mono-material structures the question of barrier solutions and their role for recycling comes up. If one looks at traditionally used aluminum metallized films or aluminum foil, future packaging designs demand a transparent barrier solution like AlOx, SiOx or EVOH.

Here the inline coating technology offers decisive advantages for BOPP and BOPE applications. Brückner’s newly developed technology is installed between the machine film orientation (MDO) and the transverse film orientation (TDO) process: A wet chemical treatment applied there directly inline provides a tailored base-layer (primer) for the subsequent AlOx / SiOx metallizing step and can be used at regular 3-layer BOPP or BOPE film stretching lines.

The metallization layer is a perfectly bonded, very homogeneously distributed over the complete film width and shows outstanding oxygen and water vapor barrier values – comparable even to high-barrier films such as metallized BOPET or aluminum foil. Since the coating material is water-based, transparent and in nanometer scale (typically < 100nm), the environmental impact and effect to the recyclability is minor and thus within the strict laws and regulations. It is even superior from an economical point of view to any barrier solution with EVOH. Besides this, the treatment is long-term stable without decay. 

Benefits of inline coating at one glance 

  • Huge variety of possible applications and film types
  • Cost efficiency
    • Thinnest, very consistent coating layers in the nanometer scale 
      (< 100 nm): Low coating material costs
    • No additional corona treatment needed on coated surface
    • Low investment costs due to the narrow coating width before transverse orientation 
    • Utilization of the transverse orientation unit’s pre-heating zone as dryer: energy optimized process without separate dryer
    • Low operation costs by saving expensive off-line coating processing steps 
  • Enhanced film properties 
    • Improved bonding of the coating to the film in the virgin, not yet crystalline state – superior to offline-coating 
    • Improved printability 
    • Significantly higher metal adhesion – perfect barrier improvement after metallization
      (Al / AlOx / SiOx)
    • Antifog and antistatic layers
    • Long term stable surface energy 
    • Improved recyclability due to lowest impact of the thin layer technology

The inline coating technology is not only available with new Brückner film stretching lines but can also be upgraded on used lines. Brückner Servtec has a complete concept for the line modification: 

  • Tailored upgrade package for existing BOPP film-production lines
  • Full integration in the existing control system 
  • All necessary modifications of existing components to run inline coated film

Film producers going that upgrading step profit from Brückner Servtec’s know-how of coating formulations and process, the experience of more than 40 installed Brückner inline coaters for BOPET and BOPP, the ccomprehensive R&D resources at the Brückner headquarters as well as a network of corresponding partners in the industry.
 

ALTTEXT
Brückner’s inline coating technology

More News

This might be interesting for you as well

15 Feb 2021

Fabulous start for the world’s largest BOPET line

UFlex and Brückner defy the Corona crisis
更多详情
04 Feb 2021

New assembly line for roller chain systems at Brückner Slovakia

Automation ensures high process quality for large quantities
更多详情
25 Jan 2021

Gulf Packaging stays on the growth path – together with Brückner

10.4m BOPP line for Saudi Arabian long-term partner
更多详情
11 Jan 2021

Turkish PlasMag strives for a new level in shrink film production

New MOPET-G line for an enhanced product portfolio
更多详情
17 Dec 2020

A special year comes to an end

Video message of the Brückner Maschinenbau management 
更多详情
02 Dec 2020

New initiative PrintCYC: Innovative solutions for a circular economy

Successful recycling of printed plastic films
更多详情
24 Nov 2020

Indian Satyendra Group takes off in the BOPP business

Packaging portfolio now usefully completed by film production
更多详情
10 Nov 2020

CCL takes a further step to boost plastic recycling – with Brückner as partner

Easy separation of labels from bottles and containers to optimize circularity
更多详情
The Brückner booth was very well attended.
05 Nov 2020

在展会现场以及实时连线直播

中国国际塑料展:布鲁克纳展台跟德国总部的实时连线直播极受欢迎
更多详情
02 Nov 2020

BOPET film is extremely versatile in use

Packaging – optical – technical – medical – and now very up-to-date: face shields
更多详情